Description
Here is the high volume Cone 10 power you've been looking for.
Finally, an electric kiln line designed specifically for volume production and fast turnaround of high mass loads. It has the power and industrial components to go straight to Cone 10 with a full load of tile or stoneware – no slow struggling to reach the final temperature. The standard KilnMaster controller gives you the options of Cone Firing, or selecting your own 8-segment Ramp/Hold firing programs. The combination of direct wiring, heavy duty elements, connectors and relays, plus traditional Skutt stainless steel and firebrick construction results in a kiln that will last for years of constant use. Among the most powerful on the market today, the line was designed at the request of Skutt customers.
Features
• KilnMaster Controller with zone control standard
• Rigid fiber Lid, far lighter than brick lids
• One handed lid prop design
• Fiber slab insert
• 12 leg stand with support plate
• Sectional design for ease in setup and moving
• 3 encapsulated type K thermocouples
• 4 handles per section
• Mercury relays
• Busbar element connection system
• Industrial gauge wiring
| Electrical Specifications - Skutt 1227-3PK | ||||||||||
| Phase | Voltage | Amps | Max. Cone | Cu. Ft. | Opening | Depth | Shipping Weight | Copper Wire Size | Breaker Size | NEMA Receptacle |
| 1 | 240 | 60 | 10 | 9.9 | 28.13" | 27" | 410 | 4 | 80 | Direct Wire |
| 1 | 208 | 69 | 10 | 9.9 | 28.13" | 27" | 410 | 3 | 90 | Direct Wire |
| 3 | 240 | 40 | 10 | 9.9 | 28.13" | 27" | 410 | 8 | 50 | Direct Wire |
| 3 | 208 | 46.7 | 10 | 9.9 | 28.13" | 27" | 410 | 6 | 60 | Direct Wire |
| You are invited to attend one of Stone Leaf Pottery’s Electric Kiln Workshops. |
| This kiln workshop is primarily tailored to new-ish customers owning an electric kiln. Still, all levels of firing experience are welcome. |
| Pre-registration is required to attend. |
| Spots for this workshop are limited and non-refundable - you may give your seat away if a scheduling conflict occurs. |
| If you have purchased a kiln from Stone Leaf in the last 2 years, this workshop is free to you. One kiln = one workshop seat. Otherwise, cost for this class is $75. |
