Description
Rutile Wash fires to an opaque pale burnt orange with a smooth matte finish. It works great for stenciling, stamping and silkscreening as it is a very stable product. When using in combination, apply a transparent and stable glaze such as a celadon or clear glaze to ensure stability in performance and maintaining details. Can be layered with other glazes to promote interactions and does not add much movement to combinations. Rutile Wash also works great as a body stain. Applying clear glaze can lessen the appearance of staining.
General Use
Shake for 5-6 seconds before use. Stir well. Dispense amount needed into a separate container and thin with water. Dispensing the glaze onto a palette (tile, plate, etc.) – helps prevent against contamination of the contents in the jar. Washes are highly concentrated so adding water is recommended. Mix only the amount you plan to use in one session. For all-over coverage, brush on one to two coats; allow to dry in-between each coat. Can be fired from cone 06 to cone 9/10. Washes can be applied to greenware and bisque. The choice of clay body, the thickness of glaze application, firing process and temperature will affect the fired results. Always test in your kiln, on your clay body.
