Description
The SpaceSaver is a convenient system for making smaller pots and maximizing table space in your studio.
The entire system is fully compatible with the now unavailable Wonderbat. It consists of a 14" adapter bat and 8- 6" insert bats. Both are made from a 1/2" exterior grade MDF which provides excellent bottom drying and rigidity. The adapter bat mounts on standard wheel-head pins with rubber "through hole" grommets making a true two-sided bat.
- Made from 1/2" exterior grade MDF
- "finger lifts" and rounded edges for easier removal, smoothness and longer wear
- Excellent bottom drying
- Rubber grommets spaced 10" on center for standard wheel pins
- Through-hole grommets make the SpaceSaver a true two sided bat
New England Hardboard Company is a potter-owned (Todd Wahlstrom and Aysha Peltz) and operated business which has been producing throwing bats for almost 20 years. We have participated in the ceramics community as artists, students, teachers, consumers and manufacturers. We are committed to providing excellent “small company” customer service and very competitive pricing.
Notes on hole sizes and bat care: Bat pins frequently vary in their diameter. Our slots and holes are cut to fit snuggly. If they are too tight on a particular set of pins, they should loosen after a couple of placements and removals of the bat. Alternatively, a small scrap of sandpaper can be rolled up and passed through the holes once or twice.
Notes on hole sizes and bat care: Bats should be cleaned and stacked or stored vertically on a bat rack after use. Do not soak wood bats of any kind. Pots should be wire cut from the bats after throwing and removed when they are leather hard. The remaining pad of clay should be scraped off before storing. Occasional sponge cleaning is fine.
