Description
Fits most tall pots and easy to load
Part of the New 22” Series, the 1022 was introduced to combine the benefits of the easy to load 1018 and the desirable height of the 1027. At 22” deep, it has a chamber that is 4.5” taller than its predecessor, the 1018. This makes it possible to fire an 18” tall vase with all the proper clearances. It comes equipped with the precise control of the KilnMaster Controller making it easy and convenient to operate. Like all other Skutt 10 sided kilns, the spring-loaded Lid Lifter is included at no extra charge. Also available in model 1022-3 with energy saving brick.
- 2 Year limited warranty, elements excluded
- 2-1/2" brick standard
- Encapsulated Type K thermocouple
- Crimp on connectors on feeder wires
- Larger, swing away air cooled switch box
- Multi-sided design
- Stainless Steel Lid Lifter standard on all 10 and 12 sided kilns
- Stainless steel jacket
- Sectionalized construction
- Two lift handles on each section
- Sealed, dust free lid with full-floating hinge
- Two types of exposed, pinned elements for optimum balance
- Reversible top and bottom slabs
- Stand included
- Peep plugs included
- UL Listing
| Electrical Specifications - Skutt 1022 | ||||||||||
| Phase | Voltage | Amps | Max. Cone | Cu. Ft. | Opening | Depth | Shipping Weight | Copper Wire Size | Breaker Size | NEMA Receptacle |
| 1 | 240 | 48 | 10 | 5.7 | 23" | 22 | 240 | 6 | 60 | 6-50 |
| 1 | 208 | 48 | 10 | 5.7 | 23" | 22 | 240 | 6 | 60 | 6-50 |
| 3 | 240 | 34.6 | 10 | 5.7 | 23" | 22 | 240 | 8 | 40 | 15-50 |
| 3 | 208 | 34.6 | 10 | 5.7 | 23" | 22 | 240 | 8 | 40 | 15-50 |
| You are invited to attend one of Stone Leaf Pottery’s Electric Kiln Workshops. |
| This kiln workshop is primarily tailored to new-ish customers owning an electric kiln. Still, all levels of firing experience are welcome. |
| Pre-registration is required to attend. |
| Spots for this workshop are limited and non-refundable - you may give your seat away if a scheduling conflict occurs. |
| If you have purchased a kiln from Stone Leaf in the last 2 years, this workshop is free to you. One kiln = one workshop seat. Otherwise, cost for this class is $75. |
